A Definite Guide to Disable SSID Broadcast on TP-Link Repeater
Wireless networks are less secure as compared to wired networks. Think about it; a hacker will find it much harder to break into your repeater when he is required to physically plug into it. This is why securing the network of your tplinkrepeater is very important. And one such way to do so is to disable SSID broadcast on your TP-Link repeater. In simple words, you need to hide the network name of your home WiFi. Keep reading this post and learn how to disable SSID broadcast on your TP-Link wireless repeater.
How to Disable SSID Broadcast on TP-Link Repeater?
Power Up Your TP-Link Repeater
Start the process by plugging your TP-Link wireless repeater into a wall socket. Once done, press the Power button on your repeater.
Note: Make sure that the wall socket into which your repeater is plugged is not damaged.
Keep Your WiFi Devices Closer
The next step in line is to place your TP-Link wireless repeater near your home router. Do not place your wireless devices too close. Or else, the signals of your devices might clash and lead you to further technical issues.
Open an Internet Browser
Switch on your PC and launch an internet browser on it. Whether you use Google Chrome, Mozilla Firefox, Apple Safari, Opera, Internet Explorer, Microsoft Edge, or any other internet browser, make sure that it is running on its latest version.
Note: If you are not sure about how to update your internet browser, it is recommended that you ping our technical experts. They are available 24×7.
Perform TP-Link Repeater Login
Enter tplinkrepeater.net into the address bar of your internet browser and press the Enter key. You will land on the official login page of your TP-Link repeater.
When prompted, enter the default admin username and password and click the Log In button. Not sure about the login credentials? Why worry? Simply refer to the user manual.
Disable SSID Broadcast
Once you have logged in to your TP-Link wireless repeater, go to the Settings section. On the top-right corner of the section, click Wireless > Extender Network. Select the Hide SSID Broadcast option and click Save.
In about a few seconds, you will successfully be able to disable SSID broadcast on your TP Link wireless repeater. On the off chance you find it a bit difficult to climb the ladder of success, follow the troubleshooting hacks given below.
Can’t Disable SSID Broadcast on TP-Link Repeater?
Use the Correct Login Credentials
In order to disable SSID broadcast of your TP-Link repeater, you need to access the Quick Setup wizard using the correct login credentials. However, if you’ve messed up while entering the login credentials, then it’s quite obvious that you will be unable to hide the network name of your repeater. Therefore, make sure that you enter the correct username and password when and where required.
Eliminate Signal Interference
WiFi interference can also prevent you from disabling SSID broadcast on your TP Link repeater. Therefore, make sure that you haven’t placed your repeater near the following devices and appliances:
- Cordless phones
- Washing machines
- Baby monitors
- Refrigerators
- Microwave ovens
- Treadmills
- Televisions
- Bluetooth speakers
Perform TP-Link Firmware Upgrade
If you are still having a hard time with the same issue, then it’s high time that you upgrade the firmware of your TP-Link repeater to the latest version.
You can perform TP-Link firmware upgrade using both the Manual method and the Tether app. Thus, feel free to choose any method that you like.
Summing Up
In order to keep your home network secure from data thieves, it is important to disable SSID broadcast on your TP-Link repeater. If even after walking through this blog, you are not able to hide the network name of your device, waste no more time getting in touch with our tech team. Our experts are working day and night to attend to the issues that you and many others are facing with WiFi repeaters.
