A Brief Guide to Fix TP Link WiFi Keeps Going In and Out Issue
Are you worried because your TP-Link repeater’s WiFi keeps going in and out? Wondering what might have gone wrong from your end that caused this issue? Well, first of all, know that this issue is not worth stressing over. As for the factors that might have led you to it, we have discussed them in this post. Along with that, we have discussed the hacks through which the issue at hand can be resolved. Thus, get down to reading.
Reasons Why TP-Link WiFi Keeps Going In and Out
- The source of connection used to connect your networking devices is wireless.
- Your TP-Link repeater is not kept within the range of the host router.
- The firmware of your repeater is running on an outdated version.
- Smart home appliances are messing with the signals emitted from the repeater.
Now that you are well acquainted with what might have caused the TP Link repeater WiFi keeps going in and out issue, it is recommended that you learn how to rectify it.
[Fixed] TP Link WiFi Keeps Going In and Out
Change the Connection Source
As mentioned above, perhaps the source of connection that you have used to connect your networking devices, as in the repeater and router is wireless. Although there isn’t anything wrong with using this source, you just cannot trust it every single time. The chances of WiFi dropping are always there.
To take care of the problem, our experts recommend that you opt for a different source of connection, i.e. wired. In other words, get your hands on an Ethernet cable. Before using the cable, make sure that it is not damaged. To be specific, neither should it have any cuts on it nor should it be worn out.
Bring Your WiFi Devices Closer
In case the distance separating your TP-Link repeater and the host router is much more than it should be, then it is no shocker why you facing the TP Link repeater WiFi keeps going in and out issue.
Thus, unplug both your networking devices from their respective sockets. Once done, plug them into the ones that are located close to each other. Doing so will keep your devices close and transmission of signals between them will happen with proper flow.
Perform TP Link Firmware Update
Updating the firmware of your wireless repeater via tplinkrepeater.net is another way to say goodbye to the TP Link repeater WiFi keeps going in and out issue. Thus, you shouldn’t waste any more time to execute this process.
In case, you are not sure regarding how to go about it, then it is recommended that you ping our technical experts. Our well-versed team of professionals will surely be able to teach you how to update the firmware of your repeater within a matter of minutes.
Eliminate WiFi Interference
Smart home appliances like Bluetooth speakers, cordless phones, washing machines, baby monitors, and microwave ovens are not good for the health of your TP Link repeater. The reason being, they can interfere with the signals of your device, thereby ruining its performance and causing technical issues.
Therefore, without giving it a second thought, change the location of your repeater. While doing so, also make sure that reflexive surfaces like fish tanks and mirrors are kept nowhere near it as they can also mess with its signals.
The minute you are done taking a walk through these troubleshooting hacks, check if the TP Link repeater WiFi keeps going in and out issue has bid farewell to you or not.
The TP Link repeater WiFi keeps going in and out issue can ruin the internet-usage experience of anyone as it stops users from making the most of their devices. Considering you are one of them, we expect that we were able to help you out through the above-given troubleshooting hacks.
On the off chance, you are still going bonkers because of the TP Link repeater WiFi keeps going in and out issue, then why don’t you take this opportunity to get in touch with our experts? Don’t worry about the time at which you should contact them. We are saying this because you will find them ready to assist you at every hour of the day.